GE KILSEN KSA700 Series - The User Menu; Introduction and Menu Access; The Main Menu; Configure

9 KSA700 Series User Guide
3 THE USER MENU
3.1 Introduction and menu access
"
Instructions in this section refer to access level 2. See section 2.3 Access
levels and passwords.
The LCD has 4 lines of information of 40 characters each. The menu is structured in the
following way:
1
[MAIN MENU] [# Exit]
3
1. Configure 4. Enable 7. View
2
2. Test 5. Disable
3. Time 6. Print
1. Menu title; 2. Menu options; 3. Use the # key to exit the current menu.
When set-up of the system is complete and all devices configured, the control panel
displays the following message:
*** ***
ALL CONNECTED DEVICES
ARE AT NORMAL STATUS
00/00/0000 00:00
To access the user menu press Enter or  and enter your password. Once the
password has been entered the Main Menu is displayed.
3.2 The main menu
[MAIN MENU] [# Exit]
1. Configure 4. Enable 7. View
2. Test 5. Disable
3. Time 6. Print
3.2.1 Configure
The Configure option is not available to standard users. Configuration may only be
performed by qualified personnel.
3.2.2 Test
Allows tests on the panel LED indicators and display. From the Main Menu select Test.
The following options appear: