11 KSA700 Series User Guide
3.2.4.1 Zone
Select
Zone
from the
Disable Menu
. The system will ask which zone is to be disabled .
Enter the zone to be modified.
Disable zone number : [001]
The fire panel will activate the internal buzzer to confirm a zone has been disabled. Press
Enter
or
to silence the buzzer.
A message will confirm the details of the event and the time it was performed.
Incidence : 1 of 1 at 00 :00
**ZONE DISABLED**
Panel: 1 Zone: 1
A disabled zone will be highlighted with the corresponding Disabled LED indicator on the
panel.
Devices assigned to a disabled zone will
not
be controlled by the fire panel but output
signals (sounders, relays) will remain active.
3.2.4.2 Devices
Every element of the installation can be enabled or disabled independently.
Select
Devices
from the
Disable Menu
.
The system will ask for the loop number and the
device address.
Loop : [01] Address : [001]
Enter the loop number and the device address and press Enter or . The Disabled LED
will be activated.
The device may be enabled again following the same procedure in the Enable Menu.
Signals from a disabled device will not be processed by the fire panel but output signals
(sounders, relays) will remain active.
3.2.4.3 Keyboard
The control panel keyboard may also be disabled by selecting
Keyboard
from the
Disable Menu.
To Next Page
Loading...