17 KSA700 Series User Guide
6 APPENDICES
6.1 Appendix 1: Applicable standards
This fire panel has been designed in compliance with EN54-2 and EN54-4 1997
standards. EN54-2 includes basic and optional requirements. The optional requirements
included in this fire panel are:
Subject Section Name
Indication 8.3 Points breakdown signals
8.4 Total loss of power supply
Controls 7.12 Coincidence detection
7.11 Output delay
9.5
Disconnection of an
addressable point
10 Test status
Outputs 7.8 Fire alarm device output
Auxiliary functions not required in the EN54-2/4
In addition to the compulsory and optional functions defined by EN54-2/4, this control
panel incorporates the following functions not required by the standard.
• Auto-search options.
•
Allocation of 10 access level 2 passwords.
• Ability to configure by zone: logical events, general events etc.
• RS485 outputs.
• RS232 outputs.
• Auto-search serial ports.
• Edition of points from the control unit.
• Edition of zones from the control unit.
• Edition of manoeuvre from the control unit.
• Storage of events in a history file.
• Language selection.
To Next Page
Loading...