Need help?Do you have a question about the GE LOGIQ A5 and is the answer not in the manual?
General| Power Supply | 100-240 V, 50/60 Hz |
|---|---|
| Imaging Modes | B-mode, M-mode, Color Doppler, Power Doppler, Tissue Harmonic Imaging |
| Transducer Options | Convex, Linear, Phased Array, Endocavitary |
| Applications | Abdominal, Vascular, Musculoskeletal, Urology |
| DICOM Compatibility | Yes |
| Display | 15-inch LED-backlit color LCD |
Describes the ultrasound system's digital architecture, scanning modes, and signal flow.
Lists all specific GE ultrasound models and configurations included in this CSI manual.
Explains document conventions, safety precaution messages (DANGER, WARNING, CAUTION), and hazard icons.
Details critical safety precautions for human, mechanical, and electrical aspects during operation and servicing.
Highlights warnings for procedures carrying significant risks during system operation, emphasizing adherence to instructions.
Outlines essential requirements and procedures for safe energy control and lockout during servicing to prevent accidental energization.
Discusses EMC principles, compliance standards, and electrostatic discharge (ESD) prevention measures for system integrity.
Details cooling, lighting, and environmental conditions required for optimal system setup and performance.
Specifies dedicated power, grounding, voltage, frequency, and outlet needs for safe and proper system installation.
Explains susceptibility to EMI, potential sources, and prevention/abatement strategies to ensure signal integrity and performance.
Outlines purchaser responsibilities, required facility preparations, and desirable features for successful system installation.
Covers preliminary checks, functional checks, peripheral/option checks, and physical inspection procedures for system upkeep.
Details critical electrical safety tests including UPS, leakage currents, grounding continuity, and outlet wiring verification.
Provides specific acceptance limits for Earth, Chassis, and Applied Part leakage currents based on relevant IEC safety standards.
Addresses troubleshooting steps for common leakage issues like AC/DC fails, chassis fails, probe fails, and others.
Guides on performing Equipment and Image Quality Checks, typically coordinated with a GE Service Representative.
To Next Page
