11
Care and Cleaning
Ice maker
Condenser
WARNING: Disconnect electrical
power to the ice maker before cleaning.
Failure to do so can result in death, fie, or
electrical shock.
AVERTISSEMENT !
Débranchez l'alimentation électrique à la
machine à glaçons avant le nettoyage.
L’omission de prendre cette précaution
peut entraîner la mort, l'incendie ou le choc
électrique.
For best performance, brush or vacuum lint and
dirt from the condenser at least once a year.
A dirty or clogged condenser:
8VHVPRUHHQHUJ\
3UHYHQWVSURSHUDLUIORZ
5HGXFHVLFHPDNLQJFDSDFLW\
&DXVHVKLJKHUWKDQUHFRPPHQGHGRSHUDWLQJ
temperatures which may lead to component
failure.
1. Unplug the ice maker or disconnect power.
Remove the 2 screws in the lower access
panel and the 2 screws from the base grille
area of the front panel support.
3. Pull the bottom forward and then pull down to
remove the lower access panel.
4. Remove dirt and lint from the condenser
fins and the unit compartment with a brush
attachment attached to a vacuum cleaner.
5. Replace the lower access panel using the 4
screws.
6. Plug in the ice maker or reconnect power.
To Next Page
Loading...
Need help?
General
