How to fix ice jammed in the GE OPAL NUGGET Ice Maker chute?
To clear a jam, press and hold the Power and Open Dispense buttons simultaneously. This will cause the OSD auger to rotate counterclockwise as long as you hold the buttons. Once the jam is cleared, release the buttons and dispense as normal. If the machine still isn't running, ensure that the power supply is working.
What to do if water is not flowing from the side tank in my GE OPAL NUGGET Ice Maker?
Bubbles in the tube connecting the side tank to the OSD may be the reason. Try adjusting the tube to allow the water to flow. Once the water line is clear, water should flow normally without further adjustments. If this doesn't resolve the issue, remove the side tank from the base and then replace it. This should eliminate any trapped air.
Can I dispense ice if my GE OPAL NUGGET is on?
Yes, as long as the OSD Nugget Ice Maker Dispenser is plugged in, the dispenser will work. Even if you've turned the machine on to reduce noise, the dispenser will still dispense fresh ice when the button is pressed, provided there is ice in the bin.
General| Ice Production Capacity | 24 lbs per day |
|---|---|
| Ice Storage Capacity | 3 lbs |
| Ice Type | Nugget |
| Control Type | Electronic |
| Installation | Countertop |
| Power Consumption | 120V, 60Hz |
| Material | Stainless Steel |
| Color | Stainless Steel |
Procedures for environmentally safe disposal of refrigerant and insulation materials.
Guidelines for installing the ice maker, including placement and ventilation.
Steps to remove packing material and check components before initial use.
Instructions on filling the reservoir and starting the ice-making process.
Steps for dispensing ice from the unit using the dispense button.
Recommendations and steps for draining the ice maker, especially during relocation or inactivity.
Information on connecting the ice maker to a smartphone app for remote monitoring and control.
Step-by-step guide for descaling and sanitizing the ice maker's internal components.
Guidelines for correctly installing the side tank relative to the ice maker.
Method for cleaning mineral buildup in the side tank using vinegar or cleaning kit.
Explanation of common sounds produced by the ice maker during operation.
Information on potential radio frequency interference and how to mitigate it.
Information on registering the appliance for enhanced service and communication.
Details on how to contact GE Appliances for customer service and support.
To Next Page
