GE IM4D User Manual (English)

Other manuals for GE IM4D

Questions and Answers:

K
Kelly RussellJul 25, 2025
How to fix a GE Ice Maker that is not working?
- C
  Craig DelgadoJul 25, 2025
  If your GE Ice Maker isn't making ice, begin by ensuring the freezer compartment is sufficiently cold, allowing 24 hours for cooling after installation. Confirm the icemaker power switch is in the ON position and the cord is correctly plugged into the socket. Check for any kinks in the water line and ensure the house water supply is turned on. Also, make sure the water valve wire adapter is fully plugged onto the terminals on the water valve. If ice cubes are piled up, level them manually.
V
vandersonJul 30, 2025
Why is my GE IM4D Ice Maker leaking water behind the refrigerator?
- M
  Mitchell AbbottJul 30, 2025
  If you find water leaking behind your GE refrigerator, it usually stems from the water supply connections. Check that the house supply is firmly attached to the water valve and that the plastic water line running from the valve to the water tube inlet is also firmly attached.
C
Courtney LiuAug 3, 2025
Why do my GE IM4D Ice Maker ice cubes have an odor or taste?
- D
  Dr. Andrea KellerAug 3, 2025
  If your ice cubes from GE Ice Maker have an unpleasant odor or taste, consider these solutions: * Empty and wash the ice storage bin, discarding old cubes. * Ensure foods are well-wrapped to prevent odor transmission.
S
Stacy DanielsAug 7, 2025
Why does my GE Ice Maker make a frequent buzzing sound?
- M
  Mrs. Michelle Barr MDAug 7, 2025
  A buzzing sound from your GE Ice Maker during normal operation indicates that the water valve is working as it fills the icemaker with water.
B
Briana CollinsAug 11, 2025
What to do if my GE IM4D Ice Maker is leaking water around the fill cup?
- T
  Thomas Brooks Jr.Aug 11, 2025
  If you notice water leaking around the fill cup of your GE Ice Maker, inspect the cup for foam pieces resulting from installation of the fill tube. Also, ensure that the fill tube is correctly inserted in the fill cup.
B
Bradley RosarioAug 16, 2025
What to do if ice cubes are not landing in the bucket of my GE IM4D?
- J
  jessica76Aug 16, 2025
  If the ice cubes from your GE Ice Maker are not landing in the bucket, ensure the icemaker power cord is correctly positioned in the hook as described in the installation instructions. Misalignment can occur if the cord is not properly placed.
Z
Zachary BradleyAug 20, 2025
What to do if the icemaker LED lights are not turning on in my GE IM4D (IM4LED only)?
- D
  Diana HinesAug 20, 2025
  If the LED lights on your GE Ice Maker (IM4LED model only) are not turning on, check the sensor for any obstructions. Ensure no food items are covering it, and wipe away any condensation or frost with a clean cloth or paper towel.