EasyManua.ls Logo

GE IM-6D - User Manual

GE IM-6D
154 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Which instructions
should you follow?
Look for a label on the back
of the refrigerator that will
tell you which instructions
to use:
L
M
N
Q
R
S
T
U
V
or
W
ENGLISH/FRANÇAIS/
ESPAÑOL
245D1617P001 49-60704-2 08-17 GEA
OWNER’S MANUAL &
INSTALLATION
INSTRUCTIONS
ICEMAKER ACCESSORY KIT
IM-6D
GE is a trademark of the General Electric Company. Manufactured under trademark license.
SAFETY INFORMATION .........3
USING THE ICEMAKER
Automatic Icemaker ....................4
Preparing for Vacation .................4
Setting the icemaker to OFF ............4
Normal sounds you may hear. . . . . . . . . . . .4
INSTALLATION
INSTRUCTIONS .................5
Parts List .............................6
Removing Existing
Ice Cube Tray Holder ...................8
Repositioning or Removing
the Freezer Shelf ......................9
Icemaker
L
.........................10
Icemaker
M
.........................14
Icemaker
N
.........................18
Icemaker
Q
.........................22
Icemaker
R
........................ 26
Icemaker
S
........................ 30
Icemaker
T
........................ 34
Icemaker
U
,
V
or
W
................38
Cold Water Line ..................... 43
Fill Tube Templates .................. 47
TROUBLESHOOTING ........... 48
WARRANTY .......................51
CONSUMER SUPPORT ..........52

Questions and Answers

  • K
    kevin61Aug 17, 2025
    Why does my GE Ice Maker leak water behind the refrigerator?
    • R
      rnormanAug 17, 2025
      A water leak behind the refrigerator may occur due to: * The house supply not being properly connected to the water valve. Ensure the house supply is firmly attached to the water valve. * The water line not being connected to the water tube inlet. Check that the plastic water line running from the valve to the water tube inlet is firmly attached.
  • P
    Patricia PierceAug 21, 2025
    Why is my GE IM-6D Ice Maker ice production slow or the freezer not cold enough?
    • R
      Renee MosesAug 21, 2025
      Slow ice production or a freezer that is not cold enough can be caused by: * The door being left open. Check to see if a package is holding the door open.
  • K
    Kimberly OrtegaAug 26, 2025
    Why does my GE IM-6D leak water around the fill cup?
    • M
      Mark RichardsAug 26, 2025
      Water leaking around the fill cup can be due to: * Foam in the fill cup from installing the fill tube. Check the cup and make sure there are no foam pieces. * The fill tube not being correctly seated in the fill cup. Check that the fill tube is correctly inserted in the fill cup.
  • M
    Matthew HartmanAug 28, 2025
    Why are my GE IM-6D ice cubes too small or is the ice production slow?
    • T
      Thomas NunezAug 28, 2025
      Small ice cubes or slow ice production in your GE ice maker can be caused by: * A clogged water shutoff valve connecting the refrigerator to the house water line. It is recommended to drill a hole in the water pipe to connect the water line. * A kinked water line. Check that the plastic water line running from the valve to the water tube inlet is not kinked.
  • M
    Michael CannonSep 1, 2025
    Why does my GE IM-6D Ice Maker make a frequent “buzzing” sound?
    • E
      Eric MccarthySep 2, 2025
      The frequent buzzing sound you hear is normal operation. During normal operation, the water valve will 'buzz' when the icemaker fills with water.
  • J
    Jasmine MaySep 5, 2025
    What to do if my GE Ice Maker ice cubes have odor or taste?
    • M
      Miss Lori MillsSep 5, 2025
      If your ice cubes have an odor or taste, consider the following: * The ice storage bin may need cleaning. Empty and wash the bin, and discard old cubes. * Food may be transmitting odor or taste to the ice cubes. Wrap foods well.
  • K
    Kelly SanchezSep 9, 2025
    What to do if GE IM-6D Ice Maker ice cubes not landing in bucket?
    • K
      Kevin FordSep 9, 2025
      If ice cubes are not landing in the bucket, it could be because the icemaker cord is causing icemaker/bucket misalignment. Ensure the icemaker power cord is in the hook as stated in the installation instructions.
  • S
    Sandra NicholsNov 12, 2025
    Why is my GE Ice Maker automatic icemaker not working?
    • R
      Rhonda EdwardsNov 13, 2025
      Several factors could prevent your automatic ice maker from working: * The freezer compartment may not be cold enough. Allow the refrigerator to cool down completely for 24 hours after installation. * The icemaker might be turned off. Ensure the icemaker power switch is in the ON position. * The icemaker might not be plugged in correctly. Check that the locking icemaker cord plug tabs are fully inserted into the socket. * The water line may be kinked. Make sure the plastic water line running from the valve to the water tube inlet isn't kinked. * The water supply might be off or not connected. Verify the house water supply to the refrigerator is turned on after installing the kit. * Ice cubes may have piled up in the storage bin, causing the icemaker to shut off. Level the cube...

Summary

Safety Information

Using the Icemaker

Installation Instructions

Before You Begin

Essential preliminary steps and considerations before starting installation.

Icemaker Installation: Model L

Specific installation guide for refrigerators requiring instruction set 'L'.

Icemaker Installation: Model M

Specific installation guide for refrigerators requiring instruction set 'M'.

Icemaker Installation: Model N

Specific installation guide for refrigerators requiring instruction set 'N'.

Icemaker Installation: Model Q

Specific installation guide for refrigerators requiring instruction set 'Q'.

Icemaker Installation: Model R

Specific installation guide for refrigerators requiring instruction set 'R'.

Icemaker Installation: Model S

Specific installation guide for refrigerators requiring instruction set 'S'.

Icemaker Installation: Model T

Specific installation guide for refrigerators requiring instruction set 'T'.

Icemaker Installation: Models U, V, W

Specific installation guide for refrigerators requiring instruction sets 'U', 'V', or 'W'.

Installing the Water Line

Instructions for connecting the icemaker to the household water supply.

Troubleshooting Tips

Icemaker Not Working

Addresses issues where the icemaker fails to produce ice.

GE IM-6D Specifications

General IconGeneral
Dimensions30"W x 24"D x 23"H
Weight160 lbs
ColorSilver
Ice TypeBullet
Power Supply115V
Production28 lbs per day
CondenserAir-cooled
Ice Production28 lbs per day
Ice Storage Capacity2.2 lbs
Ice Cube SizeSmall and Large
TypeModular

Related product manuals