8 49-60704-2
REMOVE EXISTING ICE TRAY HOLDER
Follow the instructions below for the ice tray holder that looks like yours.
Type 1
• Unhook the ice tray holder side and bottom from
the retaining hooks. Lower the holder until the side
is clear of the freezer shelf and remove it from the
freezer. You will not need this part.
Retaining hooks
Type 2
• As you lift the tab on the left side in the holder with
the blade of a screwdriver, pull the holder forward
and out. You will not need this part.
Do not
lift here
Lift this
tab out
Type 3
• Remove the 2 screws and save them for installation
of the icemaker.
• Lift the ice tray holder off the plastic hook. You will
not need this part.
Screws
Plastic hook
Type 4
5HPRYHWKHVFUHZZLWKDQXWGULYHU
• Pull the ice tray shelf away from the wall. Remove
the shelf. You will not need this part.
• Replace the screw.
Screw
Installation Instructions
INSTALLATION INSTRUCTIONS
To Next Page
Loading...
Need help?
General
