LOCATION 12 EVENT SELECTION FOR REPORT CONTROL 3 BY PARTITION (16 segments, feature selection
data)
All events for report control 3 are disabled by default. See location 4.
LOCATION 13 DESTINATION SELECTION FOR REPORT CONTROL 4 (1 segment)
This location contains the report destination for report control 4. See location 1.
LOCATION 14 BACKUP DESTINATION SELECTION FOR REPORT CONTROL 4 (1 segment)
This location contains the backup report destination for report control 4. See location 2.
LOCATION 15 REPORT DELAY FOR REPORT CONTROL 4 (1 segment)
The delay in seconds before the NX-7002 GPRS module reports to report control 4. See
location 3.
LOCATION 16 EVENT SELECTION FOR REPORT CONTROL 4 BY PARTITION (16 segments, feature selection
data)
All events for report control 4 are disabled by default. See location 4.
LOCATION 17 DESTINATION SELECTION FOR REPORT CONTROL 5 (1 segment)
This location contains the report destination for report control 5. See location 1.
LOCATION 18 BACKUP DESTINATION SELECTION FOR REPORT CONTROL 5 (1 segment)
This location contains the backup report destination for report control 5. See location 2.
LOCATION 19 REPORT DELAY FOR REPORT CONTROL 5 (1 segment)
The delay in seconds before the NX-7002 GPRS module reports to report control 5. See
location 3.
LOCATION 20 EVENT SELECTION FOR REPORT CONTROL 5 BY PARTITION (16 segments, feature selection
data)
All events for report control 5 are disabled by default. See location 4.
LOCATION 21 DESTINATION SELECTION FOR REPORT CONTROL 6 (1 segment)
This location contains the report destination for report control 6. See location 1.
LOCATION 22 BACKUP DESTINATION SELECTION FOR REPORT CONTROL 6 (1 segment)
This location contains the backup report destination for report control 6. See location 2.
LOCATION 23 REPORT DELAY FOR REPORT CONTROL 6 (1 segment)
The delay in seconds before the NX-7002 GPRS module reports to report control 6. See
location 3.
NX-7002 Installation manual Page 16 09/02/05
To Next Page
Loading...