GE NetworX NX-7002 - Programming Locations - SMS Format; Location 164: SMS 1 Format

LOCATION 164 SMS 1 FORMAT (1 segment)
The communicator format used to transmit to the SMS 1 report destination from the NX-7002
GPRS module. Consult the instructions for your central station receiver to determine which
format is compatible. SIA reporting over SMS can be set to one of three modes:
DATA FORMAT
0 SIA Separate Events
1 SIA Combined Events
2 SIA with Area Modifier
If “0” (Separate Events) is selected, messages are sent using the syntax:
>aaaaaa eennn [eennn …].
For example, >123456 BA001
If “1” (Combined Events) is selected, messages are sent using the syntax:
>aaaaaa eennn [eennn …] [/aaaaaa eennn [eennn …]…] .
For example, >123456 BA001/987654 YT000/345678 TA030
If “2” (Area Modifier) is selected, messages are sent using the syntax:
>aaaaaa eennn[/Rin] [eennn[/Rin] …].
For example, > 987654 BA001/Ri1 BA003/Ri1 YT000 TA030/Ri3.
Syntax Description :
> The message opening character.
aaaaaa A six-digit account code.
ee A two-digit SIA code.
nnn A three-digit number, e.g. zone number.
Rin Area modifier, 'Ri' is literal, n is the area or partition number.
. The message closing character.
/ Separator
[X] X is optional
[X …] X is optional and may be repeated one or more times.
NX-7002 Installation manual Page 21 09/02/05