GE OPAL XPIO23SCSS User Manual

12 49-1000464 Rev. 0
SIDE TANK ACCESSORY
Side Tank Accessory
6.Continued.
7.RemoveOpalSideTank’sreservoirfromitsbase.
8.UnscrewOpalSideTank’scapfromthereservoir.Filltheclearreservoirwithwater.
9.ReplaceOpalSideTank’scap.Ensurethecapiscleanwheninstalling.
10.CarefullyflipoverOpalSideTank’sreservoirandplaceinthebase.WatershouldstartflowingintotheOpal
NuggetIceMakerandbubblesintheOpalSideTankwillappearperiodicallyduringthetimewaterisflowingtothe
ice maker.
NOTE: Ifwaterdoesnotappeartoflowintotheicemaker,pleasecheckforthefollowing:
-Theremaybebubblesintube(B)connectingtheSideTanktotheOpal.
-Tube(B)isnotlyingflat.
Ifeitheroftheaboveissuesarepresent,adjusttube(B)toallowthewatertoflow.
11.FillOpalNuggetIceMaker’sreservoir(ifdesired).
12.PluginOpalNuggetIceMaker,andbeginmakingice.
Sidetankclip
Bottomview Bottomview
Sidetank
clip area
Sidetankclip
Side

tank

clip
Side

tank

GE OPAL XPIO23SCSS Specifications

General

Brand	GE
Model	OPAL XPIO23SCSS
Category	Ice Maker
Language	English