Installation Instructions
INSTALLING THE REFRIGERATOR (cont.)
[] ATTACH THE FRESH FOOD
DOOR HANDLE
Stainless steel handle:
Attach the handle
to the handle
mounting
fasteners and
tighten the set
screws with a
3/32" Allen
wrench. Mounting
Fasteners
Plug
(appearance may vary)
Plastic handle:
O Attach the handle to the handle mounting
fasteners by aligning the slots with the handle
mounting fasteners.
0 Slide it down until it is firmly locked into
position.
Mounting
fasteners Slots on back of
handle
(appearance may vary)
[] ATTACH THE FREEZER DOOR
HANDLE
Stainless steel handle:
Q Attach the handle to the mounting fasteners
and tighten the set screws on the bottom of
the handle with a 3/32" Allen wrench.
(appearance may vary)
Plastic handle:
Q Attach the handle to the mounting fasteners by
aligning the slots with the mounting fasteners.
O Slide it to the left until it is firmly locked into
position.
NOTE: A properly locked handle will be centered
on the freezer.
Mounting
fasteners
Slots on back
(appearance may vary) of handle
20
To Next Page
Loading...
