– 18 –
(Continued next page)
• AUTO FILL will time out.
• Handles and garnishes on the rim of the container
my cause overfi lling or variation in fi ll volumes.
• Splashing may occur depending on the location of
the container, water fl ow rate, container shape, and
ice cubes.
• Keep sensors clean with a clean damp cloth, and do
not spray liquid or cleaners directly on sensors
• AUTO FILL works best with household water pressure
of 60 to 100 psi.
Lock
Control
Water
Cubed
Auto
Fill
Pr
eci
se
Fill
Light
6HQVRUV
$ERXWDXWRILOO
To Use HANDS FREE AUTO FILL:
1. Center container on recess dispenser tray (not
touching bottom sensors) and remove hand from
container
2. Press AUTO FILL
To Stop AUTO FILL
1. Press CANCEL, to resume fi lling press AUTO FILL.
Important Facts about AUTO FILL
• For optimum results, use a uniform container
between 4 to 8 inches tall and 2 to 6 inches wide.
Container should be as tall as the bottom sensors.
• Container shape, fi ll level and functionality may vary
on containers taller than 8 inches.
• Container volumes may vary, if error message
Container Not Found is given, try a different
container.
• If an unusual-shaped container does not fi ll to
the proper volume use Precise Fill.
To Next Page
Loading...
