Installation Instructions
REMOVING THE FREEZERDRAWER
The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
rT] REMOVE THE BASKET
[] Open the freezer drawer until it stops.
r_ The freezer basket rests on a frame inside the
freezer drawer. Lift the basket up at the back.
rcl Lift the front up and lift the entire basket up
and out of the drawer.
r}-i REMOVE THE DRAWER FRONT
FROM THE SLIDES
rA] Remove the screw on each side of the railing.
Screw
[Z] REMOVE THE DRAWER FRONT FROM
THE SLIDES(cont.)
r_ Lift up on both sides of the freezer drawer
handle to separate the drawer railings from
the rail assemblies.
r_ Set the drawer front on a non-scratching
surface.
FD] Push the rail assemblies back into locking
position.
\
Rail Assembly DrAwer
Assembly
[_] REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorway, the base grille can be
removed.
Remove the base grille by removing the screws.
22
To Next Page
Loading...
