GE Profile 23 User Manual

.o
iiiiiiiiiiiiiiiiiiiiii_iiiiii;_!i!!_!;;;;;_i_
iiiii_i_i'_ii!_)ii_i_!ii_iiiii'i'M'i'i'i]iiiiiii
iiiiiiiiiiiiii_iiii_!!_!_i!iiii_iiiiiiililililililililililiiiiiii
n
v
v_ u
O_
0
0
0
0
Replacingthe light bulbs.
Setting the controls to OFF does not remove power to the light circuit.
Reveal ®appliance bulbs are used on some models. Theg can be identified by their blue color when the_l
are not illuminated.
Not all features are on all models.
Your light shield will took like
one of the following:
Tabs
OR
Pocket
Refrigerator Compartment--Upper Light
0
0
@
Unplug the refrigerator.
Thebulbs are located at the top of
the compartment, insidethe light shield.
On some models, a screw at the front
of the light shieldwill haveto be
removed. On other models,
the screw islocated in the pocket
located at the back of the light shield.
Toremove the light shield,on some
models, pressin on the tabs on the sides
of the shield and slide forward and out.
On other models,just slide the shield
forward and out.
After replacingthe bulb with an
appliance bulb of the same or lower
wattage, replace the light shield and
screws (on some models).When
replacingthe light shield,make
sure that the tabs at the back
of the shieldfit into the slotsat
the back of the light shield housing.
Plugthe refrigerator back in.
Refrigerator Compartment--Lower Light
This light is located above the top drawer.
Unplug the refrigerator.
Removethe convertible meat drawer
control knob bg pulling straight out.
After replacingthe bulb with an
appliance bulb of the same or lower
wattage, replace the shield and the knob.
Plug the refrigerator back in.
Liftthe light shield up and pull it out.
; :. ::< <#; : x < c< : ;: w ¸ ;
iii'i!¸¸¸¸,
Freezer Compartment
0
0
Unplug the refrigerator.
Removethe shelfjust above the light
shield.(Theshelfwill be easier to remove
if it isemptied first.) Onsome models,
a screw at the top ofthe light shield
will need to be removed.
Toremove the light shield,pressin
on the sides,and lift up and out.
Replace the bulb with an appliance
bulb of the same or lower wattage,
and reinstall the light shield. When
reinstalling the light shield, make sure
the top tabs snap securel U into place.
Replace the screw (on some models).
Reinstall the shelf and plug
the refrigerator back in.
Dispenser (on some models)
_1 Unplug the refrigerator.
Thebulb islocated on the dispenser
under the control panel. Removethe light
bulb bUturning it counterclockwise.
Replace the bulb with a bulb
of the same size and wattage,
Plug the refrigerator back in.
16

GE Profile 23 Specifications

General

Brand	GE
Model	Profile 23
Category	Refrigerator
Language	English