Installation Instructions
[] REPLACE THE BASE GRILLE
Replace the grille by installing the two Phillips
head screws.
t
[] START THE ICEMAKER
Set the icemaker power switch to the ON
position. The icemaker will not begin to operate
until it reaches its operating temperature
of 15°F (-9°C) or below. It will then begin
operation automatically. It will take 2-3 days
to fill the ice bin.
,,j \,- ....
Power. i
switch"",,_
rsi SET THE CONTROLS
Set the controls to the recommended setting.
5 5
[REooEOCO.TRO.SET..NOS]
© ©
0 °F IS RECOMMENDED 37 °F IS RECOMMENDED
29
To Next Page
Loading...
