To Next PageTo Next PageWhat to do if the start status indicator light is flashing on my GE Profile GDT 655?
If the start status indicator light is flashing on your GE Dishwasher, it means the door was opened or the cycle was interrupted. To restart, press the Start button once and close the door within 4 seconds. If you want to cancel the cycle while the dishwasher is running, press the Start button a second time.
Why does my GE Dishwasher beep once every minute?
If your GE Dishwasher is beeping once every minute, it's a reminder that the door has been left open during operation. To stop the beeping, press the Start button and close the door.
What to do if GE Profile GDT 655 display shows “LEAK DETECTED”?
If your GE Dishwasher displays “LEAK DETECTED”, it means a possible leak has been detected. Call for service.
Why is my GE Dishwasher beeping at the end of the cycle?
If your GE Dishwasher is beeping at the end of the cycle (on some models), this is normal. The dishwasher will beep twice at the end of the cycle. To turn off the double beep indicator (or re-activate it if it was previously turned off), press the Heated Dry button 5 times within 3 seconds. A triple beep will sound to indicate the end-of-cycle beep option has been turned on or off.
Why is there detergent left in the dispenser cups of my GE Dishwasher?
If detergent is left in the dispenser cups of your GE Dishwasher, it's likely that dishes or utensils are blocking the detergent cup. Reposition the dishes to allow water from the lower spray arm to flush the detergent cup. Also, reposition tall utensils or heavy silverware that may be preventing the dispenser cup door from opening, and avoid placing large bowls or pots directly under the detergent dispenser.
How to remove black or gray marks on dishes from GE Profile GDT 655 Dishwasher?
If you notice black or gray marks on dishes from your GE Dishwasher, it's likely that aluminum utensils have rubbed against the dishes. Remove the marks with a mild, abrasive cleaner.
How to clean stained tub interior in GE Profile GDT 655?
If your GE Dishwasher has a stained tub interior, and you see a white film on the inside surface, it's likely due to hard water minerals. GE Appliances recommends using Finish® Jet-Dry® Rinse Aid to help prevent these deposits. You can also run the dishwasher with citric acid to remove mineral deposits. Citric acid (Part number: WD35X151) can be ordered through GE Appliances Parts. Alternatively, purchase Finish® Dishwasher Cleaner and follow the directions on the label.
What to do if water won’t pump out of my GE Profile GDT 655 Dishwasher?
If water won’t pump out of your GE Dishwasher tub, it's likely that the drain is clogged. If you have an air gap, clean it. If the dishwasher drains into a disposer, run the disposer to clear it. Check to see if your kitchen sink is draining well; if not, you may need a plumber.
Why do the control panel lights go off on my GE Dishwasher?
If the control panel lights on your GE Dishwasher go off while you're setting the controls, it means there was too much time between touching the selected buttons. Each button must be touched within 30 seconds of the others. To relight the panel, touch any button again or open the door and unlock (top control).
General| Brand | GE |
|---|---|
| Model | Profile GDT 655 Series |
| Category | Dishwasher |
| Language | English |
Instructions for correct installation and upkeep to ensure safe operation and prevent damage.
Essential safety measures and precautions to observe during dishwasher operation.
Information on potential hydrogen gas risks from water heaters and safety procedures.
Precautions to prevent children from becoming trapped in discarded or active dishwashers.
Guidelines to avoid minor injuries and damage to the appliance or property during use.
Specifies voltage, frequency, and circuit requirements for safe electrical connection.
Initial steps and basic operation guide for using the dishwasher.
Detailed instructions on using the detergent and rinse agent dispensers.
Information on WiFi connectivity and smart features for the dishwasher.
Guidelines and best practices for correctly loading the dishwasher racks.
Instructions for cleaning the dishwasher's control panel safely and effectively.
Guidance on cleaning different types of exterior door panels (painted, stainless steel, integrated).
Methods for cleaning and deodorizing the inside of the dishwasher.
Information on the durability and care of the stainless steel interior components.
Instructions for inspecting and cleaning the dishwasher's ultra-fine and fine filters.
Steps to protect the dishwasher from damage during cold weather or freezing temperatures.
Information on the air gap function, its purpose, and how to clean it.
Common problems, their causes, and solutions to resolve issues without service.
Details of the manufacturer's warranty coverage, terms, and exclusions.
Clarification on limitations and disclaimers regarding implied warranties.
Information on accessing online resources, support, and product information.
Guidance on registering the appliance for enhanced communication and warranty service.
Instructions on how to book professional repair service for the dishwasher.
Information on purchasing extended warranty coverage for the appliance.
Details on connecting the dishwasher to a wireless network for remote control.
How to order replacement parts and accessories for the dishwasher.
Methods for contacting GE Appliances customer relations for feedback or issues.
