GE Profile PSCF5RGXBB - How to Use

7
Empty the pan. Place the Chill/Thaw tray
in the pan. Place the items on the tray
and close the pan completely.
Touch LED Dispenser Control:
Select the ExpressThaw
™
, ExpressChill
™
or SelectTemp
™
pad. The display and SET
light will come on. Tap the pad until the
light appears next to the desired setting.
Use the following chart to determine the
best setting to use.

ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.

To stop a feature before it is finished:
Touch LED Dispenser Control::

Tap that feature’s pad until no options are
selected and the display is off.

During ExpressThaw and ExpressChill,
the display on the controls will count
down the time
in the cycle (on some models).

After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting
(32°F [0°C]) to help preserve thawed items
until they
are used.

The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage and
operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in
plastic wrap when using ExpressThaw.
This will help contain meat juices and improve
thawing performance.
About CustomCool
™
. (on some models) GEAppliances.com
The CustomCool
™
feature is used to quickly
chill items, thaw items or hold the pan at a
specific temperature. This feature is a system
of dampers, a fan, a temperature thermistor
and a heater.
The pan is tightly sealed to prevent
temperature fluctuations in the rest of
the refrigerator. The controls for this pan
are located on the dispenser with the
temperature controls.
How to Use
ExpressThaw
™
ExpressChill
™
Touch LED Dispenser Control
How it Works