To Next PageTo Next PageWhat to do when I install a new GE Profile PYE22PSKSS water filter?
When you install your GE Refrigerator or replace the water filter, it's important to remove air from the water line and flush the filter. To do this, press the dispenser paddle and dispense cold water for at least 5 minutes.
What to do if I see frost in my GE Profile PYE22PSKSS freezer?
If you find frost inside the freezer compartment of your GE Refrigerator, remove it with a plastic spatula and towel. Then, check to make sure no food packages or containers are preventing the freezer door from closing properly. Also, check the refrigerator control panel to ensure the door alarm is activated.
Why does my GE Profile PYE22PSKSS water filter need replacing so soon?
The water filter indicator will signal when it's time to replace the water filter, typically every six months or after dispensing 170 gallons of water (on select models). However, if you notice the water flow slowing down or ice production decreasing before the indicator activates, you should replace the water filter in your GE Refrigerator sooner.
How to adjust GE Refrigerator doors?
To align the doors on your GE Refrigerator, use a 1/4” Allen wrench to adjust the right or left-hand door. The adjustment screw is located on the bottom right or left-hand side of the door. Open the freezer door to access the screw.
How to check GE Profile PYE22PSKSS Refrigerator water filter with bypass plug?
If you notice a decrease in water flow from the dispenser or reduced ice production in your GE Refrigerator, you can use the water filter bypass plug (provided with the refrigerator) to check if the filter needs replacing. Install the bypass plug and check the water flow. If the water flow returns to normal, you should replace the water filter.
Why are my GE Profile PYE22PSKSS Refrigerator doors not aligned?
Several factors can affect the alignment of the fresh food doors on your GE Refrigerator, including the floor it's installed on and how the doors are loaded. To adjust the door, use a 1/4” Allen wrench to adjust the right or left-hand door. The adjustment screw is located on the bottom right or left-hand side of the door; open the freezer door to access the screw.
How to tighten GE Profile PYE22PSKSS door handles?
If the door handles on your GE Refrigerator are loose or have a gap, you can tighten them using a 1/8” Allen wrench on the set screws located on the ends of the handles.
General| Brand | GE Profile |
|---|---|
| Model Number | PYE22PSKSS |
| Category | Refrigerator |
| Type | French Door |
| Total Capacity | 22.2 cu. ft. |
| Ice Maker | Yes |
| Water Dispenser | Yes |
| Finish | Stainless Steel |
| Energy Star Certified | Yes |
| Refrigerator Capacity | 14.7 cu. ft. |
| Width | 35.75 inches |
| Height | 69.875 inches |
General safety warnings and precautions for refrigerator use, including electrical and hazard information.
Safety precautions specific to the hot water dispenser, including scalding hazards.
Guidelines for safely disposing of an old refrigerator to prevent hazards.
Detailed description of the refrigerator's features, such as ice makers, shelves, and lighting.
Guide to understanding and using the refrigerator's control panel and temperature settings.
Instructions on using the water and ice dispenser, including important facts and cleaning.
Details on using the hands-free autofill feature for dispensing water.
Instructions for using the integrated K-Cup brewing system, including brewing and cleaning.
Information on the GE RPWFE water filter cartridge, including replacement and installation.
Information on refrigerator shelves and storage options, including rearranging and spillproof features.
Explanation of the climate zone and temperature-controlled drawer for storing produce and other items.
Details on the freezer compartment, including baskets and bins.
Guide to operating the automatic ice maker, including setup and troubleshooting.
Important information and checks to perform before starting the refrigerator installation process.
Specifications for refrigerator dimensions, essential for fitting into installation spaces.
Step-by-step guide for physically installing the refrigerator, including door removal and handle attachment.
Instructions for installing the anti-tip floor bracket to secure the refrigerator and prevent tipping hazards.
Detailed steps for connecting the refrigerator to the household water supply for ice maker and dispenser.
Explanation of normal sounds and operating conditions of the refrigerator.
A guide to common problems and their solutions, helping to troubleshoot issues before calling for service.
Addresses common myths and provides factual answers regarding refrigerator operation and maintenance.
Details on the refrigerator's warranty coverage, terms, and conditions for US customers.
Specific warranty terms for the RPWFE water filter cartridge, including coverage and exclusions.
Technical data on the water filter's performance in reducing contaminants according to NSF standards.
Contact information and resources for GE Appliances customer support, service, and product registration.
