LightBub t placeme t
watt incandescent bulb
(30-watt--WB36X10198/
40-watt--WB36X10003),
available from your
GE Supplier.
1 "Ib ret/lace the bulb(s),
first disconnect the t)ower
at the main fi_se or circuit
breaker l/anel or pull
tl/e plug.
2 Remove the screw t_'om
light cover and lower
tile cowm
! ¸
REMOVE SCREW
3 Be sure the bulb(s) to be
replaced are cool before
removing. Aller breaking
the adhesive seal, remove
the bull) kw gently turning.
4 Replace the screw.
Colmect electrical power
to the owm.
watt incandescent bulb
(30-watt--WBZaXI0198/ ,:
40-watt--WBZaX10003),
available fromyour
GESupplier.
1 "Ib replace the oven liglm
first discom]ect the power
at tile main fl_se or circuit
breaker panel or pull
the plug.
2 Remove tile top gillie t)_
taking out the 4 s( I_(_x_rs
lhat hold it iH t/la( e.
REMOVE SCREWS
i i i i
3 Push tab back and lift
light housing. Replace
the bulb and press the
light housing back imo
place.
4 Replace the top grille
and 4 screws. Com]ect
electrical power to
the ()Veil.
33
To Next Page
Loading...
