Appendix
16
NOTE: Product improvement is a continuing endeavor at GE Appliances.
Therefore, materials, appearance and specifications are subject to
change without notice.
CONVERTING DISHWASHER WITH
FACTORY- EQUIPPED POWER CORD
TO A PERMANENT CONNECTION
This procedure requires the conversion leads set aside in
Step 1.
• Make sure the power cord for the dishwasher is
unplugged from the wall outlet.
• Remove screw from junction box cover and remove cover
if present.
• Disconnect the three power cord conductors from the
dishwasher harness.
• Remove and discard the power cord.
• Connect the conversion harness (optional) to the
dishwasher harness by connecting like-colored wires.
• Return to Step 16 in these instructions to complete the
conversion.
Conversion Harness
Printed in the United States
To Next Page
Loading...
