GE Spacemaker Series - Installation Preparation; Materials You will Need; Tools You will Need

PARTS SUPPLIED IN
INSTALLATION PACKAGE:
• Two 8-18 x 5/8” Phillips-head wood screws
• #10 hex head screw and junction box cover
• Drain hose (78” long)
• Hose clamp
• Literature, product samples and/or coupons
TOOLS YOU WILL NEED:
• Phillips-head screwdriver
• 1/4” and 5/16” nutdriver
• 6” Adjustable wrench
• Level
• Carpenter’s square
• Measuring tape
• Safety glasses
• Flashlight
• Bucket to catch water when flushing the line
• 15/16” socket (optional for skid removal)
• Gloves
• Pliers
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set
MATERIALS YOU WILL NEED:
• WX09X70910 or WX09X70911 power cord if
applicable to your installation, or electrical cable
• UL-Listed wire nuts (3)
• Thread seal tape
• 90° elbow (¾” hose internal thread on one end,
opposite end sized to fit water supply)
• GPF65 Side-mount bracket kit for use with granite
countertops
For New Installations Only:
• Electrical cable
• Water line–3/8” minimum copper tubing (including
ferrule and compression nut)
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• GPF10S drain hose (10’ long), if needed
• Screw-type hose clamps
• Cord protector (power cord models only
as needed)
• Conversion leads (power cord models only
as needed)
Installation Preparation
2
Hole Saw Set
Measuring Tape
Tubing Cutter
Drill and Bits
Phillips-Head
Screwdriver
15/16” Socket
1/4” and 5/16”
Nutdriver
Bucket
Flashlight
Gloves
Carpenter’s
Square
Safety Glasses
Level
Pliers
6” Adjustable
Wrench
78" Drain Hose
#8
Phillips-Head
Wood Screws
5/8" long
Screw Kit
#10
Hex Head
Junction Box Screw
1/2" long
Cord Protector
- Optional -
(Power Cord
Models Only)
Conversion Leads
WD21X10107
- Optional -
(Power Cord
Models Only)
Thread
Seal Tape
3 Wire Nuts
Hot Water Line–3/8"
Minimum Copper Tubing
Electrical Cable
or WR09X70910 or
WX09X70911 Power Cord
Screw-Type
Hose Clamps
Strain Relief
Shut-Off
Valve
GPF65 Side-Mount
Bracket Kit
Optional 10'
Drain Hose
GPF10S
Waste Tee
Coupler for optional
drain hose
90° Elbow
Air
Gap
Hose Clamp
Literature
Junction
Box Cover