14
Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
WSLP1100—ONE-FAUCET CONNECTIONS (CONT.)
MAKE SURE THE TEMPERATURE
SELECTOR IS SET AT COLD/COLD
6
SLOWLY TURN ON THE WATER
FAUCET ALL THE WAY TO THE
DESIRED TEMPERATURE
SETTING
7
PLUG THE POWER CORD INTO A
3-PRONG GROUNDED OUTLET
8
Insure proper ground
exists before use
The electrical power cord is on the back of the
washer.
REMOVE THE PROTECTIVE FILM
COVERING THE CONTROL PANEL
9
INSTALLATION CHECKLIST
10
Before starting the washer, check to make sure:
❏ Main power is turned on.
❏ The washer is plugged in.
❏ The water faucets are turned on.
❏ The unit is level.
❏ There are no leaks at the faucet, drain line
or washer.
To Next Page
Loading...
Need help?
General
