GE SX Series User Manual

OUTLINE DRAWINGS, ELEMENTARY DRAWINGS AND INPUTS/OUTPUTS
SX TRANSISTOR CONTROL Page 10
Revised May 2003
Section 3.0 ORDERING INFORMATION, ELEMENTARY AND OUTLINE DRAWINGS
Section 3.1 Ordering Information for Separately Excited Controls
Example:
Part Number: IC3645 SE 4 D 33 2 C3
Argument Number: 01 02 03 04 05 06 07
Argument 01: Basic Electric Vehicle Control Number
Argument 02: Control Type:
SP = Series Control (Pump)
SH = Separately Excited Control ( Plugging )
SR = Separately Excited Control ( Regen to Zero )
Argument 03: Operating Voltage:
1 = 120 volts 4 = 48 volts
2 = 24 volts 5 = 36/48 volts
3 = 36 volts 6 = 24/36 volts
7 = 72/80 volts
Argument 04: Package Size:
D = 6.86” X 6.67”
R = 6.86” X 8.15”
U = 8.66” X 8.13”
W = 8.66” X 10.83”
Argument 05: Armature Current
( 2 characters )
22 = 220 Amps
33 = 330 Amps
40 = 400 Amps
etc.
Argument 06: Field Current
( 1 character )
2 = 20 Amps
3 = 30 Amps
4 = 40 Amps
etc.
Argument 07: Customer / Revision
A1 = Customer A / Revision 1
B1 = Customer B / Revision 1
etc.

GE SX Series Specifications

General

Programming Language	Ladder Logic, Function Block Diagram, Structured Text
Humidity	5% to 95% non-condensing
Protection Class	IP20
Type	Programmable Logic Controller
Manufacturer	GE
Communication Ports	RS-232, RS-485, Ethernet
Input Voltage	24V DC
Operating Temperature	0°C to 55°C
Dimensions	Varies depending on module configuration
Weight	Varies depending on module configuration
Communication Protocol	Modbus
Number of Digital Inputs	Varies by model
Number of Digital Outputs	Varies by model
Number of Analog Inputs	Varies by model
Number of Analog Outputs	Varies by model
Power Consumption	Varies depending on module configuration
Storage Temperature	-40°C to 70°C (-40° to 158°F)