GE VG4250 - Connections & Setup; Navigating On-Screen Menus; QuickSet Guide and Menu Access

12 Chapter 1
Connections & Setup
Using the Remote Control to Navigate
On-screen Menus
The technical term is “Navigation” – how you move through the on-screen menus. Choosing a
menu item is the same for all on-screen displays; press the corresponding number button on the
remote control select the desired item.
Note: Selecting a menu item can take you to another menu, activate a choice, or activate a data entry
field (such as the hour field in the Set Time menu).
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Español
3 Français
VCR MAIN MENU
1 Timer Recordings
2 Time
3 Channels
4 Setup
5 Preferences
6 Audio
7 Language
0 Exit
Complete the QuickSet Guide
The menu system in your VCR allows you to customize your preferences as well
as use all the VCR’s features. To help you use the VCR as quickly as possible,
there is an initial QuickSet Guide that walks you through several important
setup steps at one time.
The first time you turn on the VCR, you will be able to set up available
channels, time and date information, and more. The first menu you will see
asks which language you prefer to have the on-screen menus appear in.
Note: With numbered menu choices, press the corresponding number button on the
remote control to select it. In the case of the LANGUAGE menu, press 1 for
English, 2 for Español (Spanish), or 3 for Français (French).
The remaining menus throughout the setup will appear in the language chosen.
Just follow the step-by-step procedures until the QuickSet Guide is complete.
Accessing Menus
The series of preferences that are set in the QuickSet Guide can also be
handled individually using the VCR’s on-screen menu system. There are other
settings not covered in the initial setup that are also handled using the on-
screen menus.
For example, if you decide to run the QuickSet Guide again, you can access the
Setup menu by pressing the remote control’s MENU button. Once the Main
Menu is displayed, press the 4 button to choose Setup. From there, you can start
the QuickSet Guide from the beginning.
All on-screen menus are accessed the same way, starting in the Main Menu
which is displayed by pressing the remote control’s MENU button.
Note: See chapter two, Using the VCR’s Menu System, for details about
changing the VCR’s settings.
All of the VCR’s menus are
accessed through the Main
Menu. Press the remote
control’s MENU button to start.