(Carotid IMT – cont.)
6. Select Measure
7. Select specific Vessel IMT from the menu
8. Select RT or LT
9. Select Vessel IMT Post
or Vessel IMT Ant
Measure
Carotid IMT
(Carotid IMT – cont.)
10. Place first caliper at start point within vessel
above intima if measuring
Posterior or below intima for Anterior
11. Place second caliper a minimum of 50 pts
from start point and set caliper. IMT values
will automatically calculate and will be
displayed in results window on the screen
Tip: If IMT trace is not correct, double
click on end point arrow and shorten
distance. Trace fit can also
re-optimize the auto trace tool
To Next Page
Loading...
