4D LV Volume Acquisition
(Flexi Zoom – cont.)
Workflow 2:
1. Scan in regular 2D mode
2. Press Multi-Dimensional on the keyboard
3. Press 4D Zoom Prepare on touch panel
(Flexi Zoom – cont.)
To adjust Zoom of interest
1. Adjust the zoom ROI using trackball,
by default it is set to Position
2. Press Set button to change from
Position to ROI Size and adjust
The biplane image with the
Zoom of interest is displayed
4CH 2CH
A biplane image appears
on the screen
To Next Page
Loading...
