– 7 –
3. LOAD SIZE
The water level should just cover the clothes. Adjust the load size accordingly. Loosely load clothes
no higher than the top row of holes in the washer basket.
4. WASH CYCLE
These wash cycles control the length of the washing process (refer to Timetable of Function). The
following chart will help match the WASH CYCLE setting to specific laundry needs. When a cycle is
selected, the automatic temperature that the machine defaults to can be changed to whatever tem-
perature desired.
Wash Cycle Description Default Wash/Rinse Temperatures
COLORS For easy care and wrinkle-resistant items. WARM/COLD
WHITES For heavy to lightly soiled cotton, household HOT/COLD
linens, towels, work, and play clothes.
DELICATES* For lingerie and delicate fabrics with light to COLD/COLD
normal soils.
QUICK WASH For one or two lightly soiled items that are WARM/COLD
needed quickly.
5.
TEMP WASH/RINSE
Select the water temperature for the wash and rinse cycles. Always follow fabric manufacturer’s care
label or instructions when laundering.
Note: For portable models using a one-faucet connection, the water flow mix and water temperature
are adjusted at the faucet.
6. START/PAUSE
Press the START/PAUSE button to start the wash cycle.
7. TIME REMAINING
The TIME REMAINING window displays the time remaining in the wash and rinse cycles. When the
time remaining is greater than 99 minutes, 2H (two hours) will be displayed in the window. It also
displays Error Codes for troubleshooting.
Note: When the cycle is complete, the control panel will turn OFF automatically.
*In DELICATES cycle the activator action is not continuous. Activator is active for 2 min. then off for 3
min. for entire wash cycle.
Note: WARM/WARM is a manual setting only.
To Next Page
Loading...
Need help?
General
