Need help?Do you have a question about the GE WSSH300G and is the answer not in the manual?
General| Color | White |
|---|---|
| Control Type | Electronic |
| Bleach Dispenser | Yes |
| Fabric Softener Dispenser | Yes |
| Automatic Temperature Control | Yes |
| Energy Star Certified | Yes |
| Agitator | No |
| Spin Speed (RPM) | 700 |
| Voltage | 120 V |
| Frequency | 60 Hz |
| Maximum Spin Speed (RPM) | 700 RPM |
| Water Level Settings | Automatic |
| Depth | 27 inches |
| Washer Type | Top Load Washer |
Essential warnings regarding electrical disconnection and grounding before servicing the appliance.
Provides detailed specifications for component resistance, water levels, pressure, drain, and motor performance.
Step-by-step guide for initiating, executing, and exiting the diagnostic test mode.
Procedures for recalling, identifying, and clearing stored error codes from the control board.
A visual representation of the appliance's electrical connections and component layout.
Describes the inverter's role in controlling motor speed and direction via voltage variation.
Details the induction motor and its speed control mechanism using a tachogenerator.
Explains how to identify, recall, and interpret error codes indicated by LED flashes and beeps.
Provides specific examples of LED flash patterns for common error codes like E41, E14, and EF1.
Lists failure codes, their associated fault conditions, and recommended checks or replacement actions.
Continues the list of failure codes, fault conditions, and troubleshooting guidance.
Details diagnostic tests for water flow, leaks, drain issues, and water level control.
Outlines tests for door closure, electrical continuity, and door lock assembly resistance.
Covers tests for motor resistance, tub spin, and winding continuity.
Details tests for communication issues, NTC resistance, and incoming power frequency.
Step-by-step instructions for removing and disassembling the detergent drawer.
Instructions for removing the door strike and loading door handle.
Steps to detach the main loading door from the appliance hinges.
Procedures for separating door panels and removing the inner glass.
Steps to detach the door hinges from the front panel and door.
Instructions on how to detach the door bellows seal from the front panel.
Comprehensive steps to remove the entire tub assembly from the washer.
Procedures for separating the two halves of the outer tub.
Information on seals, bearings, and potential spin basket maintenance.
Details on the spin basket vanes, their function, and attachment method.
Step-by-step guide to remove the spin basket vanes.
Lists common error codes, their potential causes, and recommended solutions.
To Next Page
