GE WSXH208A Series - Drive Motor Spin vs. Tumble Troubleshooting

– 23 –
If between pin 5 to pins 2,6,
and 10 read 120 VAC and
between pin 5 to pins 2 & 9
read 0.
Drive Motor Spins
but does not Tumble
Disconnect the six & ten pin plugs
from the speed control board.
Measure the voltage drop between
pin 5 of the six pin plug & 1,2,6,9
and 10 of the ten pin plug
If any other readings
beside 120 VAC between
pin 5 to pins 2,6, and 10
reads and 0 between pin 5
to pins 2 & 9.
Defective
timer
Defective
timer
Defective
Speed Control
Board
Defective
Speed Control
Board
Drive motor tumble
but does not spin
If any other readings
besides 120 VAC between
pin 5 to pins 6 and 9 reads
and 0 between pin 5 to
pins 1,2, & 10.
Disconnect the six & ten pin plugs
from the speed control board.
Measure the voltage drop between
pin 5 of the six pin plug & pins
1,2,6,9 & 10 of the 10 pin plug.
If between pin 5 to pins 6 & 9
reads 120 VAC and between
pin 5 to pins 1,2, & 10 read 0.
GEA00595
Drive Motor Spins but Does Not Tumble
Drive Motor Tumbles but Does Not Spin