65
Power Saver
This setting allows you to save power and get the maximum
possible running time for your batteries. Follow the steps
below to turn o the LCD screen and camera automatically
after a period of inactivity.
1. Select the
Power Save setting from the Setup menu as
described previously.
2. Press the Up/Down button to select the power items for
the screen and camera and press the Right button.
3. Press the Up/Down button to adjust the selected item.
Both items have the following options:
• LCD o:
On, 30 sec, 1 Min, 2 Min.
•
Camera o:
On, 3 Min, 5 Min, 10 Min.
4. Press the button to conrm.
Language
See “Setting the Language“ section on page 14.
Zone
The Zone setting is a useful function on your overseas trips.
This feature enables you to display the local time on the LCD
screen while you are overseas.
1. Select the
Zone setting from the Setup menu as
described previously. The world time screen will appear.
2. Use the
Up/Down navigation buttons to switch between
the hometown ( ) and travel destination ( ) elds.
3. Use the
Left/Right navigation buttons to select a city
close to the desired time zone. Then press the button
to conrm.
To Next Page
Loading...
Need help?
General
