Need help?Do you have a question about the GE ZDT800S F and is the answer not in the manual?
Explains how to select cycles and options, and how the dishwasher operates.
Describes the feature that initiates hot water at the beginning of a cycle.
Explains how the display indicates error codes and operational status.
Details the operation of the unit in Service Mode, including load tests.
Diagram showing the exterior components of the ZDT870 model.
Locates and describes the junction box for electrical connections.
Details the toe kick panel and its removal.
Explains the function and location of the pre-toe kick panel.
Describes the two types of leveling systems and their adjustment.
Explains the front roller system and how to adjust it.
Details the adjustable rear roller floor protection pan and its removal.
Provides steps for removing the 4-leg floor protection pan.
Describes the silverware basket and its components.
Explains the lower rack roller system and how to remove it.
Details the removal procedure for the bottle wash manifold.
Explains how to remove the mid spray arm assembly.
Specifies models that include a third rack and their characteristics.
Details the spring system for door balance and combinations.
Describes the tub trim's function and appearance.
Explains the tub gasket's role in sealing and its installation.
Provides step-by-step instructions for removing the dishwasher door.
Instructions on how to separate the inner and outer door panels.
Explains the rinse aid dispenser's operation and sensing mechanism.
Describes the inner door gasket and its function.
Details the detergent module's operation and voltage requirements.
Overview of the control panel components and user interface.
Instructions for removing and servicing the top console cover.
Details on attachment strips securing the inner and outer door panels.
Explains how the bar handle is attached and removed.
Describes the inner door end caps and their purpose.
Step-by-step guide for removing the UI board from the console.
Explains how to diagnose issues using the UI board and its LED indicators.
Provides steps to access the main control board for service.
Overview of the inverter control board's function and its role in motor control.
Highlights safety precautions when working with the inverter and its components.
Step-by-step instructions for accessing the inverter for service.
Explains how to access and interpret inverter fault codes using diagnostic methods.
Provides procedures for removing the sump module and its associated components.
Details diagnostics for the top tub lights, checking for series circuit issues.
Explains how to check voltage for side tub lights and LED assemblies.
Illustrates the electrical circuit for the fill strip, including the flood switch.
Describes the fill process, water valve operation, and water level sensing.
Shows the wiring diagram for the thermistor and its connections.
Explains the water flow, filtration, and cleaning process in the circulation system.
Lists the electrical and performance specifications for the circulation system.
Describes the process for calibrating the turbidity sensor.
Explains how to diagnose issues with the circulation turbidity sensor.
Details the function and maintenance of filter vent caps.
Procedure for removing the upper spray nozzle using a screwdriver.
Instructions for removing the upper spray arm by pushing and turning.
Describes the mid conduit's function in supplying water to the spray arm.
Explains the bottle wash port and its water supply.
Procedure for removing the lower spray arm assembly.
Specific instructions for removing the lower spray arm on certain models.
Step-by-step guide for removing the power diverter assembly.
Discusses common causes and solutions for poor wash performance.
Details normal spray arm operation and RPM specifications by model.
Focuses on the lower spray arm and its interaction with the clear door.
Explains the upper spray system components and their role.
Details the conduit adapter plate's function in the spray system.
Explains the drain pump's function and the drain cycle algorithm.
Details the sequence and timing of the drain pump during cycles.
Guides for diagnosing issues related to the drain pump and system.
Describes the operation of Power Dry and Max Dry cycles.
Diagram showing connector and pin locations on the top side of the main board.
Diagram showing connector and pin locations on the bottom side of the main board.
Schematic diagram for PDT760S_F and CDT765S_F models.
General| Type | Built-In |
|---|---|
| Capacity | 16 Place Settings |
| Noise Level | 42 dBA |
| Wash Cycles | 6 |
| Control Type | Electronic |
| Color | Stainless Steel |
| Water Filtration System | Yes |
| Dispenser | Detergent and Rinse Aid |
| Energy Star Certified | Yes |
| Soil Sensor | Yes |
| Drying System | Dry Boost |
| Dishwasher Control Features | Delay Start |
| Upper Rack Features | Adjustable |
| Lower Rack Features | Adjustable |
| Third Rack | Yes |
| Water Usage | 3.5 Gallons |
To Next Page
