EasyManua.ls Logo

GE Monogram ZBD1800G User Manual

GE Monogram ZBD1800G
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
If you have questions, call 800.626.2000 or visit our website at: www.monogram.com
Installation
Instructions
Built-In Dishwashers
ZBD1800G
Question and Answer IconNeed help?

Do you have a question about the GE Monogram ZBD1800G and is the answer not in the manual?

GE Monogram ZBD1800G Specifications

General IconGeneral
TypeBuilt-In
Place Settings14
Control TypeElectronic
ColorStainless Steel
Energy Star CertifiedYes
Water Consumption3.5 gallons
Third RackYes
Stainless Steel InteriorYes
Soil SensorYes
Drying SystemCalrod Heater
OptionsSanitize
Delay StartYes

Summary

Safety Information

Before You Begin

Read installation instructions completely and carefully to ensure proper setup and safety compliance.

For Your Safety

Observe all CAUTION and WARNINGS throughout the instructions. Wear safety glasses during installation.

Installation Preparation

Prepare Dishwasher Enclosure

Specifies cabinet opening dimensions, clearances, and plumbing/electrical entry points for installation.

Prepare Electrical Wiring

Details electrical requirements, grounding instructions for direct wire and power cord models.

Prepare Hot Water Line

Instructions for routing the hot water line and making the connection to the dishwasher.

Installation Instructions

Step 13 Connect Drain Line

Instructions for connecting the drain hose to air gap, waste tee, or disposer, including hose length limits.

Step 14 Connect Power Supply

Procedure for connecting the dishwasher's power supply, including wire connections and strain relief.

Step 15 Pre-Test Checklist

A checklist of items to verify before the initial startup to ensure proper operation and avoid service calls.

Step 16 Dishwasher Wet Test

Procedure to perform a wet test, checking for water entry, leaks, and proper draining.

Related product manuals