Automatic Icemaker
Built-In Refrigerators
Automatic
icemaker
Avoid contact with the moving
parts of the ejector mechanism, or with the heating
element (located on the bottom of the ice maker)
that releasesthe cubes. Donot place fingers or
hands on the automatic ice making mechanism
while the refrigerator is plugged in.
Eviteztout contact avec les
pisces mobiles du mScanisme d'Sjection ou
I'SISmentchauffant (situsdans le basde la
machine (_gla¢ons) qui lib@eles cubes.Ne placez
pas lesdoigts ou les mains sur le mScanisme de
production de glace automatique Iorsque le
rSfrig@ateur est branchS dans la prise Slectrique.
A newly-installed refrigerator may take 12-24
hours to begin making ice.
The icemaker will produce seven cubes per
cycle-approximately 15 cycles in a 24-hour
period, depending on freezer compartment
temperature, room temperature, number of door
openings and other use conditions.
If the refrigerator is operated before the water
connection is made to the icemaker, set the
power switch to OFF.
Icemaker
Switch FeelerArm
When the refrigerator has been connected to the
water supply, set the power switch to ON.
Throw away the first full bucket of ice.
Besure nothing interferes with the sweep of the
feeler arm.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice.
It is normal for several cubes to be joined
together.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NOTE:Icemaker works best between/40 and 120
PSIhome water pressure.
12
To Next Page
Loading...
