Design Guide
Refrigerator
23-7/8" From
Rearof
Refrigerator
Case
Trim 3/4"
,_ 1/2" i
u
u
1/4" '
u
u
u
u
u
u
u
. I
n
m
Frameless Cabinets: The case trim overlaps
cabinets at the top and sides. Therefore,
frameless cabinets may require filler strips
to prevent interfeence with cabinet door
swing. The opening must allow for filler strips.
3/4" Overlay
Panel
(NominalSize)
Top View
130 ° DOOR SWING
(factory setting)
Scale 1:1
Door
i-1/4"
IMPORTANT NOTE -
FOR DISPENSER MODELS:
Dispenser models are supplied with two
dispenser trims, one to fit framed panels
and one for overlay panels. Dispenser trim
fit to the custom panel depends on correct
panel thickness. Framed panels must be
1/4" nominal. Overlay panels should be
constructed as shown to accomplish a total
1.100" thickness. See pages 7 and 8 for details.
To Next Page
Loading...
