Commissioning
First start
2018-9015-008
01. July 2018
46 / 162
General
DONE N/A
The owner received the instruction manual from the dealer and commits to read it.
The owner is instructed by the dealer on how to operate and maintain the product.
The safety guards and safety labels are installed.
The signal lights, ABS light and beam light are operational.
The lubrication points are lubricated.
The oil levels are adequate.
All bolts are torqued.
The wheel nuts are tightened at proper torque.
The owner is instructed on the wheel nut torque verification at initial service period.
The tires are inflated at proper pressure.
All drains and openings are closed.
All electric and pneumatic connections are secured.
All control boxes are securely closed.
A visual inspection is performed to ensure there are no leaks, signs of distortion or defective parts.
The top fill opening ball valve is open.
The top fill opening opens and closes automatically.
The air braking system is operational.
The air suspension system is operational.
The remote control is operational.
The hydraulic system is operational.
The antenna is in upright position.
The owner is instructed on how to use the side opening.
The owner is instructed on how to operate the manual override.
The owner is instructed on how to operate the semi-tanker using the hydraulic levers.
The owner is instructed on how to operate the semi-tanker using the wireless remote control.
The discharge functions are operational (impeller, articulated transfer pipe, rotative valve).
Note
The dealer and the owner must fill the warranty registration form when the
checklist is completed.
Dealer's signature:
______________________________________________________________
Owner's signature:
______________________________________________________________
Date:
______________________________________________________________
To Next Page
