GEAppliances GTW680BSJWS User Manual (English)

Questions and Answers:

G
Gabriela BryantAug 21, 2025
Why is my GEAppliances Washer leaking water?
- J
  jonathandavisAug 21, 2025
  If your GEAppliances Washer is leaking water, several factors could be at play. Ensure the fill and drain hoses are tightly connected to the faucets and the drain facility, and that rubber washers are correctly installed. Using too much detergent can also cause leaks, so use less, especially with soft water or smaller loads. Switching to a High Efficiency detergent might help. Check your household plumbing for clogs, and ensure the drain hose isn't rubbing against the wall to prevent wear. Also, make sure to tighten the hoses at the faucets and inspect the fill hoses, replacing them every 5 years if needed.
R
Rebecca MasonAug 22, 2025
How to fix low water flow in my GEAppliances Washer?
- P
  Phillip MarshallAug 22, 2025
  If you are experiencing low water flow in your GEAppliances Washer, the water valve screens might be clogged. Turn off the water source and remove the water connection hoses from the upper back of the washer and the water faucets. Clean both the hose screens (if so equipped) and the screens in the machine using a brush or a toothpick. Reconnect the hoses and turn the water back on, ensuring there are no leaks at the connections.
J
jeffrey76Aug 25, 2025
What to do if my GEAppliances Washer won't start?
- J
  jordan21Aug 25, 2025
  If your GEAppliances Washer won’t operate, there are several things to check. First, ensure the washer is properly plugged into a working outlet. Verify that both hot and cold water faucets are fully turned on. Close the lid completely and press the Start button, as a safety feature prevents operation when the lid is open. Inspect your house circuit breakers or fuses and replace them or reset the breaker if necessary, ensuring the washer has a separate outlet. As a last resort, try resetting the electronics by unplugging the washer, waiting two minutes, plugging it back in, and pressing Start.
J
justinzimmermanAug 27, 2025
Why is the water temperature wrong in my GEAppliances Washer?
- W
  William RamirezAug 27, 2025
  If the water temperature in your GEAppliances Washer seems incorrect, several factors could be responsible. New laundry detergents are designed to work well with cooler water, improving energy efficiency. Ensure that both the hot and cold water faucets are fully turned on and properly connected, checking that hoses are connected to the correct faucets, marked “H” and “C”. Clean the water valve screens if they are clogged. Also, verify that your house water heater is set to deliver water at 120°F–140°F (48°C–60°C). Note that on some models, the washer optimizes water temperature for best results and may add cold water even when hot is selected.
C
Charles BurkeAug 27, 2025
How to reduce suds in my GEAppliances Washer?
- J
  Jacob PerezAug 27, 2025
  If you notice too many suds in your GEAppliances Washer, it could be due to several reasons. If you have soft water, try using less detergent. Measure your detergent carefully, and reduce the amount if you have soft water, a smaller load, or lightly soiled items. Also, consider switching to a High Efficiency detergent.
P
patkinsonAug 29, 2025
Why are my clothes still wet after washing in my GEAppliances Washer?
- P
  pierceamberAug 29, 2025
  If your clothes are coming out of the GEAppliances Washer too wet, make sure you have selected a spin option. The cycle you've chosen should match the load you are washing, as some fabrics feel wetter when rinsed with cold water. If the wash load is out of balance, redistribute the load and run it through a Drain & Spin cycle.
K
Katherine WhitakerAug 31, 2025
What to do if my GEAppliances Washer won’t drain?
- K
  Kathleen NguyenAug 31, 2025
  If your GEAppliances Washer is not draining, check the drain hose. Ensure it is straightened and not kinked, and that the washer is not sitting on it. The top of the drain outlet should be less than 8 ft (2.44 m) above the floor.
K
Kimberly ChristensenSep 2, 2025
Why are my clothes damaged after washing in my GEAppliances Washer?
- F
  Frank SkinnerSep 2, 2025
  If you notice snags, holes, tears, rips, or excessive wear on your clothes after washing them in your GEAppliances Washer, make sure to fasten snaps, hooks, buttons, and zippers before washing. Remove any loose items like pins, objects from pockets, and sharp buttons. Turn knits inside out, as they snag easily. Use the correct amount of bleach according to package instructions, and never apply undiluted bleach directly to clothes. Rinse items that may have chemicals like hair bleach or dye on them before washing, using the Speed Wash cycle with the Extra Rinse option.
M
Mary McneilSep 3, 2025
Why are my clothes gray or yellow after washing in my GEAppliances Washer?
- S
  Steven RamosSep 3, 2025
  If your clothes are grayed or yellowed after washing in your GEAppliances Washer, ensure you are following the detergent manufacturer’s directions regarding the amount to use. If you have hard water, use a water conditioner or install a water softener. Make sure your water heater is delivering water at 120°F–140°F (48°C–60°C). Avoid overloading the washer by loosely loading clothes no higher than the top row of holes in the washer basket, loading items around the outside for best results. Sort clothes by color to prevent dye transfer, especially if the fabric label indicates washing separately.
C
Caitlyn HamiltonSep 5, 2025
Why are my clothes wrinkled after washing in my GEAppliances Washer?
- K
  keith01Sep 5, 2025
  If your clothes are wrinkling after being washed in your GEAppliances Washer, make sure to match the cycle selection to the fabric type, especially for easy care loads. Avoid mixing heavy items like jeans with lighter items like blouses, and consider using a fabric softener. Loosely load clothes in the washer basket to prevent overcrowding. Wash clothes in warm or cold water to avoid repeated washing in water that is too hot.

GEAppliances GTW680BSJWS Specifications

General

Brand	GE
Model	GTW680BSJWS
Appliance Category	Washer
Washer Type	Top Load
Capacity	4.6 cu. ft.
Color	White
Control Type	Electronic
Number of Wash Cycles	12
Spin Speed	Up to 800 RPM
Steam Function	No
Dispenser	Detergent, Fabric Softener, Bleach
Energy Star Qualified	Yes
Wash Action	Agitator
Maximum Spin Speed	800 RPM
Voltage	120 V
Frequency	60 Hz
Weight	150 lbs
Wash Options	Pre-soak
Width	27 in
Depth	27 inches
Height	44 in
Water Level Options	Auto, High, Medium, Low

Related product manuals

GEAppliances GTW485ASJWS

81 pages

GEAppliances GTW680BSJWS User Manual

Table of Contents

Questions and Answers:

GEAppliances GTW680BSJWS Specifications

Related product manuals