Gear4 CDM-D150 - Radio and Auxiliary Functions; FM Radio Tuning and Presets

3
User Manual CDM-D150 | GEAR4
For use with FM radio:
Extend the radio antenna. ■
Press the FUNCTION button on the unit or ■
remote control to select FM mode.
Press ■ 󰎔or 󰎙 on the remote control or turn
dial on the unit to scan to the frequency
desired.
Press PLAY ■ 󰎖󰎗 on the remote control or on
the unit to go to the next avaliable station.
To save a preset
frequency:
You can set up to 10 DAB presets and 10 ■
FM presets.
Adjust the radio to your desired frequency ■
then press and hold one of the numeric
buttons (1-9) on the remote control. 'Preset #
Saved' will be shown on the display.
To listen to a preset frequency, press the ■
specific numeric button (1-9) to go to the
desired preset.
To reset the radio:
Press and hold the CLOCK/MEMORY ■
button for 5 seconds. “Factory RESET” will
appear on the display, press PLAY 󰎖󰎗
to confirm.
For use with other
audio devices:
Press the FUNCTION button on the unit or ■
remote control to select AUX mode.
Plug one end of the 3.5mm audio cable ■
(not included) into your MP3 or MP4 player
and connect the other end into the AUX
line-in port at the front of the unit.
Press play on your MP3 or MP4 player. ■
N.B. The remote control will not control devices
connected via 3.5mm cable.
RDS (Radio Data System):
Press the INFO/ESP button on the remote ■
control to scroll through the available
information (track/artist info and station
name, current time & date, and frequency).
The information will be displayed on the screen. ■
To set the clock:
In standby mode press and hold the CLOCK/ ■
MEMORY button on the unit for a few
seconds and select either 24 hour or 12 hour
using the
/ buttons on the unit or remote
control (Press the CLOCK/MEMORY button
to save).
The hour display will start flashing. Press or ■
turn the
/ button on the unit or remote to