Geberit ACO 201 - Product Information; Product Usage; Functionality Overview

Use
Structure
1 Pressing device
2 Pressing jaw
3Locking pin
4Roller drive
5 Accumulator
Function
1 Green LED
2Red LED
3 Start button
4 Stop button (emer-
gency off)
Operating instructions ACO 201
The pressing tool ACO 201 is only allowed to be used for pipes and
EN
pressfittings in the Geberit Mepla and Geberit Mapress pressfitting
systems.
Only tools and accessories with the compatibility code are
allowed to be used.
Any other utilisation is deemed to be a violation of the intended use.
Geberit will not accept any liability for damage resulting from this.
P
The pressing tool consists of
• pressing device
• pressing jaws or
• adapter with pressing collars or
• MapressMAM jaw adapters
The equipment may vary depending on the scope of supply.
1
2
5
4
3
123
4
B310-001&BDC © 02-2006
15