Need help?Do you have a question about the Geberit ACO 202 and is the answer not in the manual?
General| Brand | Geberit |
|---|---|
| Model | ACO 202 |
| Category | Power Tool |
| Language | English |
Defines the intended user group for the pressing tool according to industry standards.
Specifies the allowed applications and limitations for the Geberit pressing tool and attachments.
Details essential safety precautions, warnings about improper use, and protective measures.
Explains warning, caution, and product symbols used in the manual and on the device.
Lists the components that make up the Geberit pressing tool kit and their identification.
Explains the electrohydraulic pressing process, automatic function, and button controls.
Describes the meaning of the green and red LEDs for indicating tool status and malfunctions.
Provides detailed technical specifications including voltage, power, force, weight, and limits.
Details sound pressure and vibration emission values, including measurement inaccuracies and usage notes.
Step-by-step guide on how to correctly install pressing jaws or adapter jaws into the tool.
Instructions for charging the battery and inserting it into the pressing tool for operation.
Lists necessary preparation steps before starting the pressing operation, such as pipe end condition.
Covers critical safety warnings related to flying fragments, crushing hazards, and continuous operation.
Explains that pressing attachments are wearing parts and how wear can be identified.
Details the steps to initiate the pressing sequence using the start button and confirms completion.
Addresses issues where the tool fails to start and no lights are illuminated, listing causes and actions.
Explains potential causes and solutions when the green LED flashes, often related to the retaining pin.
Details causes and actions for the red LED flashing, including button timing and operating temperature.
Explains reasons for the red LED illuminating, such as overloading or tool defects.
Covers tool stoppage with no LEDs or alternating LED flashes indicating maintenance needs.
Outlines critical maintenance intervals and procedures for the pressing tool and attachments.
Details specific maintenance tasks required at regular intervals or after a certain number of operations.
Step-by-step instructions for cleaning the pressing tool using compressed air or a brush.
Guide on how to lubricate the roller drive and retaining pin using specified lubricants.
Provides information on the proper disposal of the electrical equipment according to WEEE directive.
States the EC declaration of conformity for the Geberit pressing tool ACO 202 with relevant directives.
Lists the harmonized standards applied to the pressing tool for compliance.
To Next Page
