Geberit ESG 3 - Page 50

EN
Malfunction Cause Rectification
<Ready for welding>
LED display
flashes, and
<Malfunction>
lights up.
Too many serial
welding joints.
▶ Reduce the number of
welding joints (see i ,
page393)
<Malfunction> LED
display
flashes.
Electrofusion
tool is defective.
▶ Send the electrofusion
tool to an authorised
repair shop
1)
.
<Mains connection>,
<Ready for welding>
and
<Welding complete>
LED displays
light up, and
<Malfunction> LED
display
flashes.
Worn coupling
connection
plugs or too
many inter-
ruptions from
removing the
coupling
connection
plugs during
welding
procedure.
▶ Disconnect the mains
plug.
▶ Visually inspect the
coupling connection
plugs and coupling
connection cables if
necessary, or replace
the connecting cables.
▶ Send the electrofusion
tool to an authorised
repair shop
1)
.
1) The addresses of authorised repair shops can be requested from Geberit
sales companies.
50
9962820747 © 01-2023
966.473.00.0(03)