Geberit FORS - Page 10

Geberit
Inlet Valves
8
Note: This membrane assembly is only suitable
for Fors bottom Inlet valve!
Ensure diaphragm is aligned with insert.
Close stop valve.
Wash diaphragm with clean water.
Lock assembly into housing.
Re-insert into valve.
Unclip diaphragm cover (1/4 turn).
Remove water connector, check filter.
Note: Fors is also fitted with a filter which
might need cleaning.
Remove diaphragm cover.
Assemble diaphragm insert and cover.
Wash filter.
Check and adjust the filling level.
WARNING! Upon maintenance or replacement of filling valve, the installer must ensure the cistern fill and spill level is correctly
adjusted and complies with AS 1172.2 and AS/NZS 3500.1.
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
WL
CL
W
L
CL
FORS SERVICE
Open stop valve.