Geberit
Inlet Valves
5
IMPULS380
REAR-ENTRY INLET VALVE
Art. No. 222.013.00.1
The Geberit Impuls380 cistern rear-entry inlet valve Art. No. 222.013.00.1 with 300mm long hose and 3/8” female connection is
manufactured for use with the Geberit outlet valve. It fastens onto the overflow pipe of the outlet valve via a clip Art. No. 274.400.00.1
(clip has to be ordered separately). Impuls380 rear-entry Art. No. 222.013.00.1 can also be used with the Geberit UP170 concealed
cistern. The Impuls380 inlet valve has an operating pressure range from 10 to 1000 kPa (0.1 to 10 bar). The valve is designed for fast and
quiet filling action.
Service and spare parts
The Geberit Impuls380 cistern inlet valve is maintenance friendly. In the event of a blockage, the silicone diaphragm and
lever part can be easily removed without tools for cleaning. The spare part is supplied as a kit (diaphragm, insert, cover and
lever) in one package. The rear-entry hose is also available as a spare part. After any maintenance or replacement of the
valve, make sure that the fill and spill level of the cistern is correctly adjusted.
G 3/8”
170.360.00.1 Diaphragm and lever
240.989.00.1 Rear-entry hose with 3/8” female nut (l = 300mm)
274.400.00.1 Inlet valve clip
To Next Page
Loading...
