Need help?Do you have a question about the Geberit Monolith Plus and is the answer not in the manual?
General| Compatibility | Wall-hung toilets, Floor-standing toilets |
|---|---|
| Flush Volume | Dual flush: 3/6 liters |
| Height | 1010 mm |
| Width | 480 mm |
| Depth | 106 mm |
| Power Supply | Mains connection |
| Features | Odor extraction |
| Application Purposes | Residential, Commercial |
| Characteristics | Dual flush |
| Material | Glass (front), Aluminium (side) |
Intended for all users of the Geberit Monolith Plus sanitary module. Children need supervision.
Designed to flush WC ceramic appliances; other uses are improper. Geberit accepts no liability for improper use.
Important safety precautions for operation, maintenance, filter replacement, and use by children or persons with disabilities.
Module has user detection, odour extraction, orientation light. Soft-touch buttons for flush and odour extraction.
Lists technical specifications like voltage, frequency, power, wireless technology, and flow pressure.
States compliance with EU Directive 2014/53/EU and provides a link to the full text.
Describes the control panel elements: orientation light, indicator light, and flush/odour extraction buttons.
Explains how to operate the flush buttons and the orientation light upon user approach.
Instructions on how to start/stop the odour extraction unit and notes on its automatic shut-off.
Configuration options for light colour, switching on/off conditions for the orientation light.
Time delays for the orientation light to switch off automatically after user detection.
Settings for run-on time, detection distance, and switch-on mode for the odour extraction unit.
Procedure for confirming filter replacement via the settings menu.
How to enter settings mode by pressing and holding the Odour extraction button for three seconds.
Both indicator lights flash three times, signalling entry into settings mode.
Press the <Large flush volume> button repeatedly to cycle through and change settings.
Press the <Small flush volume> button to save the selected setting.
Orientation light flashes upon saving; unit exits mode if no changes are made.
Press and hold the <Odour extraction unit> button for three seconds to exit settings mode.
Both indicator lights flash three times, indicating the module is ready for normal operation.
The module is high-quality and easy-care. Recommends mild cleaning agents.
Do not use chlorine, acidic, abrasive, or corrosive cleaning agents. Use mild agents only.
Use a soft, damp cloth and a mild liquid cleaning agent, then dry with a lint-free cloth.
Conditions indicating filter replacement: weakened odour neutralisation or red indicator light.
Impurities in the filter can contaminate breathing air. Replace the filter annually.
Hold the cistern lid with both hands, lift it up, and fold it towards the front to access the filter.
Remove the old filter, dispose of it properly, and insert a new one.
After replacing the filter, close the cistern lid securely.
Confirm the filter replacement in the device settings under the "Replace filter" menu.
Explains WEEE symbol and user obligations for proper disposal of old equipment.
To Next Page
