Gecko Aeware Advanced in.k600 User Manual

• Select
Spa
to view Spa menu.
Spa to view Spa menu.Spa
Starting Pump 1
•
Select
Pump 1
to turn Pump
1 on.
•
Select
Pump 1
repeatdely
to control
repeatdely to control repeatdely
pump 1 speeds.
(20 minute built-in timer)
Starting Light
• Select
Light
key to turn light on.
• Select
Light
key again to turn
light off.
(120 minute built-in timer)
Next menu page
• Press
Next
key to display the next
page in the spa menu.
Goes to
b
lower option
Turning Economy on
L
owers the temperature set point of
the spa by 20˚F (11˚C).
• Select
Economy
to activate the
Economy mode.
• Select
Economy
again to override
economy programming (see spa
setup section)
Standby Mode
S
tops all pumps at the same time by a
simple click of a button!
• Select
Standby
to activate
this mode.
• Select
Standby
to again to resume
normal operations.
S
ystem automatically returns to
Normal mode after a certain period
of time, unless the Standby mode has
been reactivated.
Spa light will fl ash for a few seconds
before the exit of Standby mode and
restart the pumps. The "Standby"
message is also displayed during
Standby mode.
* Pump will stay turned on if there is a
request for more heat.
Displaying time
• Press
Ok
key
to display the time.
• Press
Ok
key a second time
Ok key a second time Ok
to go
back to water temperature display.
Viewing active progress bars
A progress bar is a visual indicator of
the time remaining before a device
is turn off or before the end of the
Standby mode. Only one bar is
displayed at the time.
• Use
Left
or
Left or Left
Right
keys to visualize
Right keys to visualize Right
the progress bar of each activa-
ted device.
This menu allows control of all pumps, blower and spa light, as well as the
activation of the Economy and Standby modes. Every time a device is on,
its animated icon is displayed. All pump activity can be stopped at once by
activating the
Standby
mode.
Standby mode.Standby
Main
Functions
•
Start
Pump 1
Start Pump 1Start
• Start Pump2
• Start
Light
• Starting Blower
• Economy
Mode
• Standby Mode
•
Display Time
• Progress Bars
Starting Pump 2
• Select
Pump 2
to turn Pump 2 on.
• Select
Pump 2
once more to turn
pump 2 off.
(20 minute built-in timer)
Starting Blower
• Select
Blower
to turn Blower on.
Blower to turn Blower on.Blower
• Select
Blower
once more to turn
b
lower
off.
lower off.lower
(20 minute built-in timer)
• Press
Mode
key to display the
key to display the
mode Selection window.
Quick Reference Card
Please consult your
spa user manual for c
omplete info on
the features of your sp
a sys
tem
.
Starting Pump 3
• Select
Pump
3
to turn Pump 3 on.
• Select
Pump
3
once more to turn
pump 3 off.
(20 minute built-in timer)
Please consult your
spa user manual for c
omplete info on
in.k600
Advanced series of full-function
keypads that give
complete control to wet fi ngers!
Aeware's new se
ries of
keypads
ries of keypadsries of
features
a high profi le with a
large
LCD display,
menu-dri
ven
interface
and raised keys that let users easily control all in.xm functions
and programming directly from spa side,
creating a true and unique user experience.
Description
Pump
icons
AM/PM (˚F/ ˚C)
Time, temperature
& message digits
Progress bar icon
Menu title
Operation Mode
Operation Mode
Information
Display
Status icons
Light
icons
Light iconsLight
"Ok" Key
"Next" Key goes to
menu page
"Mode" Key
selects mode of
operation: Spa,
Audio, Options
Audio, Options
"Right"
"Right"
Multi-
Multi-
function
function
Key
Key
"Minus" Key
decreases par-
ameter setting
"Left" Multifunction
Key
goes back to previous
parameter setting or
increases parameter value
"Soft" Key 1,
2, 3, 4
"Plus" Key increases
parameter setting
Service icon
Lock
icon
Lock iconLock

Gecko Aeware Advanced in.k600 Specifications

General

Brand	Gecko
Model	Aeware Advanced in.k600
Category	Hot Tub
Language	English

Summary

Main Functions

Starting Light

Turn the spa light on or off. Features a 120-minute built-in timer.

Starting Pumps

Control spa pumps, including multi-speed operation. Each pump has a 20-minute built-in timer.

Starting Blower

Activate the spa blower. Features a 20-minute built-in timer.

Economy Mode

Lowers spa temperature by 20°F (11°C) to save energy. Can be activated or overridden.

Standby Mode

Stops all pumps simultaneously. System automatically returns to normal mode.

Displaying Time

Press OK key to display the current time. Press again to return to temperature display.

Progress Bars

Visual indicator of time remaining for device operation or Standby mode.

Programming System

Filter Cycle Settings

Configure filter cycles, duration, and modes for optimal spa operation.

Economy Mode Programming

Set up or modify Economy mode parameters for energy saving.

Economy Status

View or manage the current status of the Economy mode.

Setting Time

Time of Day

Adjust the spa's internal clock to display the correct time.

Other Settings

Display Settings

Customize display options, including backlight and normal display mode.

Backlight Adjustment

Control the brightness of the keypad display for better visibility.

Display Information

View system information such as version numbers.

System Information

System Overview

Access information about the spa system, including heating and keypad status.

Keypad Information

View details related to the keypad's functionality and software.

Keypad Software Upgrade

Instructions or information on how to upgrade the keypad's software.