To Next PageTo Next Page
Need help?Do you have a question about the Gecko in.xe and is the answer not in the manual?
General| Blower Output | 1 |
|---|---|
| Ozone Output | 1 |
| Light Output | 1 |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Warranty | Varies by manufacturer |
| Power Supply | 240V |
| Keypad Compatibility | in.k200, in.k300, in.k35, in.k4, in.k450, in.k500, in.k600, in.800 Auxiliary Keypads: in.k100 |
Essential safety warnings before installing or connecting the unit.
Facilitates wire insertion and improves connection integrity for heat reduction.
Integrated safety system for the heat.wav heater to prevent dry firing.
Provides protection against water infiltration with IPX-5 rated components.
Restricts access to electronic components, only allowing service access.
Features colored, tagged, and waterproof connectors for easy and safe assembly.
Intelligent algorithm for optimal pump start and temperature readings.
UL approved kinetic heating protection manages water temperature increase.
Allows for programming and configuration updates via a USB-like device.
Step-by-step guide for securely mounting the spa pack on a floor base.
Guide for drilling holes and securing the keypad to the spa surface.
Steps to connect the in.k200 keypad to the spa pack using the in.link connector.
Details on connecting the spa pack to power for North American installations.
Explains the latch mechanism, strain relief, and watertight design of connectors.
Lists available cable kits for 240V systems and their typical uses.
Details cable kits for 120V/240V systems, including keying cables.
Explains the purpose of each indicator and button on the in.k200 keypad.
Guides on how to use the keys to control system functions like pumps and lights.
Details how the system regulates water temperature and verifies parameters.
Explains features for freeze protection and heater element cooling.
Lists default and adjustable settings for filter cycles, pump runtime, etc.
Step-by-step guide for resolving internal hardware errors (Hr).
Steps to diagnose and fix issues related to the regulation probe (Prr).
Comprehensive guide to diagnose why Pump 1 is not operating correctly.
Diagnostic steps for issues with Pump 2 or the blower.
Detailed electrical ratings for UL/CSA and TUV certified models, including output current.
