Gecko in.xe - Troubleshooting: Hr and Prr Error Messages; Hr Error Message Troubleshooting; Prr Error Message Troubleshooting

32
in.xe TechBook
32
An internal hardware error has been detected
• Restart the spa pack
and start & stop all
pumps and blower.
• If error reappears,
replace the in.xe
spa pack.
Step-by-Step
Hr error message / step-by-step
Regulation probe issue
• Verify if regulation
probe (located above
the heater) is properly
connected.
• Replace heater
if problem persists.
• Replace spa pack,
if problem persists.
Step-by-Step
Prr error message / step-by-step
HL Probe & Temp / Regulation Probe