Gecko in.xe User Manual

in.xe TechBook
3737
• Measure water
temperature with a
DIGITAL thermometer
and compare its
reading with temp on
the display. If temp
reading is different,
replace heater.
• Remove spa cover and
let spa cool down.
• Add cold water and
lower filter cycles.
• If problem persists
replace spa pack.
Remove
spa cover
and let
system cool
down, until
the err
or
clears.
Replace
spa
pack,
if pr
oblem
persists
Replace
spa
pack,
if pr
oblem
persists
Measure water
temperatur
e
with a DIGIT
AL
thermometer
Is the
temper
ature
reading on the
display correct?
yes
no
Add cold
water and
lower filter
cycles.
Replace
heater,
if
problem
persists
Water temp in the spa has reached 108°F
OH error message / flow chart & step-by-step
Flow chart
Step-by-Step

Gecko in.xe Specifications

General

Blower Output	1
Ozone Output	1
Light Output	1
Dimensions	Varies by model
Weight	Varies by model
Warranty	Varies by manufacturer
Power Supply	240V
Keypad Compatibility	in.k200, in.k300, in.k35, in.k4, in.k450, in.k500, in.k600, in.800 Auxiliary Keypads: in.k100