Gecko in.xe User Manual

in.xe TechBook
11
Heater connections
heat.wav heater
in.xe comes with a high performance heat.wav heater.
With no pressure switch, it features in.flo integrated
dry-fire protection.
A watertight panel protects the heater and probe
connectors. Removing the panel gives access to in.flo
dry-fire protection and hi-limit/regulation probe
connectors, line 1, line 2 and ground power input cables
connection ports.
The heat.wav heater is factory configured 240 V /4 kW
(or 2 kW), but it can be converted to a dedicated
120 V / 1 kW by simply switching a cable connection
port. Option available on North American models only.
heat.wav specification summary:
• Supports 120 V or 240 V
• Protected by external breaker (not fused)*
• Incoloy® or Titanium (optional) heater element
for greater protection against corrosion.
*Note: European models are 230 or 240 V and are fuse protected
GroundN L1
L2 GroundL1
Connections for 120 V
heater (1 kW)
Connections for 230/240 V
heater (4 kW or 2 kW)

Gecko in.xe Specifications

General

Blower Output	1
Ozone Output	1
Light Output	1
Dimensions	Varies by model
Weight	Varies by model
Warranty	Varies by manufacturer
Power Supply	240V
Keypad Compatibility	in.k200, in.k300, in.k35, in.k4, in.k450, in.k500, in.k600, in.800 Auxiliary Keypads: in.k100